How Much Does a Barndominium Cost in Alabama?
Angi's national guide puts a typical barndominium near $230,000, from about $112,800 for a 30 x 40 to $504,000 for a 60 x 70. Kits run $20,000 to $90,000 or more and slabs $4,000 to $12,500. In Alabama, septic, water, power and wind design add to that. Call (205) 997-3545.
Barndominium prices vary with size, finish, land and site work more than with anything else. The figures below come from Angi's national barndominium cost guide and are typical ranges, not Alabama quotes. Builders here price every job on its own, and the land under it can swing the total by tens of thousands of dollars. Call (205) 997-3545 for a written quote from an independent Alabama builder.
Typical cost by building size
| Footprint | Square feet | Typical national range |
|---|---|---|
| 30 x 40 | 1,200 | $112,800 to $144,000 |
| 40 x 60 | 2,400 | $225,600 to $288,000 |
| 40 x 75 | 3,000 | $282,000 to $360,000 |
| 60 x 60 | 3,600 | $338,400 to $432,000 |
| 60 x 70 | 4,200 | $394,800 to $504,000 |
The guide's national average is about $230,000. Remember that the footprint includes any shop or garage under the same roof, and unfinished shop space usually costs less per square foot than living space.
Typical cost by component
| Line item | Typical national range |
|---|---|
| Kit (materials only) | $20,000 to $90,000+ |
| Professional assembly | $25,000 to $50,000 |
| Kit build by licensed pros | About $85 to $95 per sq ft |
| Contractor finish to move-in ready | About $150 to $190 per sq ft more |
| Concrete slab | $4,000 to $12,500 |
| Interior materials | $25,400 to $100,700+ |
| Flooring | $7,000 to $28,500 |
| Drywall and interior finish | $5,000 to $30,000 |
| Land clearing | About $3,000 on average |
| Permits, where required | $1,200 to $2,000 |
| Gravel / asphalt driveway | $14 to $25 / $70 to $170 per foot |
| General contractor fee | 10% to 20% of the project |
Alabama line items to budget for
- Septic. A registered professional's lot evaluation, the county health department permit and a licensed installer. Lots with slow soils, shallow bedrock, clay or groundwater need an engineer-designed system, which usually costs more.
- Water. A tap fee from a city system or water authority, or a well where no line reaches the road.
- Power. Ask Alabama Power, your electric cooperative or your TVA-served utility what a line extension to the building site will cost.
- Wind design. Frames, fasteners, doors and windows engineered for higher coastal wind speeds cost more in Mobile and Baldwin counties than in north Alabama.
- Flood zone. Raised pads, elevation certificates and flood insurance on low coastal and river land.
- Safe room. Priced by size, type and door, cheapest when planned before the slab is poured.
- Humidity control. Closed-cell spray foam and a dehumidifying HVAC system cost more up front than batts but protect a metal building.
Why quotes vary across Alabama
Freight and crew travel cost more on remote land in the Black Belt or the hills of northeast Alabama than near Birmingham or Huntsville. Rock on a Tennessee Valley lot, a long clay drive in the Piedmont, or a raised pad on the coast each change the site-work line. Finish level matters as much as size: a 2,400-square-foot home with spray foam, quartz counters, tile showers and a wraparound porch can cost far more than the same shell with simpler finishes.
How to compare builder quotes
- Confirm each quote is for the same scope: turnkey or shell, same square footage, same porches and shop.
- List what is excluded, and which items are fixed prices versus allowances: site work, septic, well, driveway, power.
- Compare the same insulation, windows, roof panel gauge, HVAC and finishes.
- Ask for the draw schedule and confirm your lender accepts it.
- Check each builder's Home Builders Licensure Board license on the board's online lookup.
A worked example
Here is how a typical budget might stack up for a 40 x 60 barndominium, about 2,400 square feet, with 1,600 square feet of living space and an 800-square-foot shop, on five wooded acres. The building itself would fall somewhere in the national guide's $225,600 to $288,000 range for that size, depending on finish. Then add the land work: clearing at around $3,000, a 600-foot gravel drive at $14 to $25 per foot (roughly $8,400 to $15,000), a septic system priced after the lot evaluation, a water tap or well, and a power extension if the nearest line is far from the pad. A safe room, a wraparound porch and spray foam in the shop each add more. The point is not the exact total but the order: price the land work early, because it is the part of the budget most likely to surprise you.
Costs that come after move-in
- Insurance. Ask agents before you build; some carriers price metal-frame homes differently, and coastal wind and flood coverage can be a large yearly cost.
- Property taxes. Ask your county's tax assessor or revenue commissioner how a new home and shop will be assessed.
- Septic upkeep. Plan for periodic pumping and inspection, and keep the system's permit paperwork with your house records.
- Exterior maintenance. Metal roofs and siding need little care, but check fasteners and sealant at trim and penetrations every few years.
Ways to keep the cost down
- Keep the footprint a simple rectangle; jogs and extra corners add steel and labor.
- Choose land close to an existing power line and water main, with a short drive.
- Have the septic evaluation done before you buy, so a surprise engineered system does not wreck the budget.
- Finish the shop side simply and spend the money on the living space.
Read our custom barndominium homes and site prep and septic pages, or call (205) 997-3545 for a quote.
Call and we will connect you with an independent local provider.
CALL NOW: (205) 997-3545